The light is gently reflected and a pleasant atmosphere is generated with hardened glass elements attached to the front. The built-in 120mm RGB fans in the front come into its own. The flawless glass front gives the housing a beautiful but also simple design.
three 120 mm RGB fan are mounted on the front to keep the internal temperature at a normal level. The already pre -installed 120mm fan on the back is supported. In the sense of "Open the Wind Way", fresh air is sucked through the front and the floor by the fans and then emitted again on the back and lid as exhaust air. The installation of water cooling has also been provided in this case.
The magnetic dust filter on the lid and the filter, which can be pulled out on the floor, can also be removed and cleaned. With the I/O panel on the top, you have easy access, even if the case is under your desk. The I/O panel has two
USB 3.0, a
USB 2.0 connections, as well as an HD audio and microphone access. Both
ATX, M-
ATX and
ITX mainboards can be installed in this housing.
With a installation depth of 205mm and a length of 358mm, cooler with a maximum height of 162mm and VGA cards with one length to be installed by 350mm. In the lower part of the housing, in addition to the hard disk cage, it is possible to attach ATX power supplies with a length of up to 205mm. >
atx No voltage supply (ATX) USB/Audio