Filters and sort order
23 Items
In stock
The drive cages can be removed in just a few simple steps and thus enable relaxed assembly of the drives. Slot card holders on the internal, removable cross carrier, which can also absorb up to 4x 2.5 "(6.35 cm) drives, ensure safe operation of the cards inserted. Thanks to the lockable doors in the front, the external drives are protected from unauthorized access. Integrated Dust filters ensure clean air and perfect cooling behavior. Inter-Tech IPC 4U-4098-S rack assembly 4U ...
An infinity mirror in the front, an RGB LED bar in the power supply tunnel and three 120 mm RGB fans, which is illuminated by RGB LEDs, make the X-908 Infini2 a true eye-catcher. The front from tempered glass and the side part made of 4 mm thick tempered glass give a generous insight into strong effects and colors, which can be managed by a switch on the front or via the 5V RGB header connection (addressable RGB LEDS). Manual fan control Tempered Glass Front Blende RGB/PWM board...
In stock
The drive cages can be removed in just a few simple steps and thus enable relaxed assembly of the drives. Five installation slots in full height and an installation option for an ATX power supply complete the image. Thanks to the lockable doors in the front, the external drives are protected against unauthorized access. Integrated dust filter provide clean air and one Flawless cooling behavior. Li> without power supply ( ATX ) USB
The C-701 Panorama is the perfect show case to stage its hardware. Due to the large -scale front panel from tempered glass and the large -scale tempered glass side part, the housing, as the name suggests, offers a great insight into the interior - both from the front and from the side. The 9 installation spaces for 120 mm fans allow sufficient freedom of design, how and whether the interior is illuminated or optionally with AIO water cooling in the sizes 120 mm, 240 mm or 360 mm. "SSDS and 3....
A front illuminated by three RGB fans makes the W-III housing a true eye-catcher. The front consists of tempered glass with a high-quality brushed aluminum strip and is supplemented by a window side from acrylic glass, which is slightly dimmed, insights reveals on its installed system. The effects of the three RGB fans can be controlled by a switch on the front, but better still via the supplied remote control. in the lid of the housing and below the power supply is located A removable ...
A slightly tinted side part made of tempered glass and two RGB LED strips that clamp over the entire lid and stem of the housing make the S-3901 the ideal candidate for a system with elaborate LED lighting. To do this, not only contributes to the standard 120 mm RGB LED fan installed as standard, but above all the digital 5V RGB control board, where there is space for up to 7 other RGB fans, all of which is managed via the RGB mainboard control can become. The connection variety of the integr...
Are you looking for a special housing that moves your lighting ideas in new spheres? Then the S-3906 Renegade is just right for you! A slightly tinted side part made of tempered glass and a wide RGB LED strip, which tensions C-shaped over the three-dimensional front panel of the housing, turn the S-3906 the ideal candidate for a high-end system with elaborate LED lighting. To do this, not only the 120 mm RGB LED fan installed as standard contributes to this, but above all the digital 5 V RG...
The assembly cage can be turned out 90 ° and thus contributes to the simple, screwless assembly of all drives. The integrated cable guides enable good laying. There is also a installation space for an 80 mm fan. You can position the housing both horizontally and vertically. With four USB front connections, 2x USB 3.0/2x USB 2.0, you have many connection options for external devices. High-quality front 4x Front USB ports Intelligent interior concept Compact design ...
A front illuminated by three blue ARGUS L-122025 LED fan makes the CXC2 housing a real eye-catcher. The front consists of tempered glass, with a trendy honeycomb pattern behind it, and is supplemented by a window side of acrylic glass. Space and connection options for other fans, an optionally 120 mm or 240 mm water cooling and various hard drives can be found in the spacious interior of the CXC2. In the lid of the housing and below the power supply there is a removable dust filter. On the ...
The IT-5916 impresses with its robust and compact design and has the front connections user-friendly in the upper part of the front panel. In addition to a timeless look, the IT-5916 convinces with space for four fans, installation options for 3.5 "& 2, 5 "hard drives and a well thought -out inner cage that offers space for graphics cards up to a length of 35.5 cm. A SL-500K power supply is also installed as standard. The two USB 3.0 front connections and the SDHC/MMC/MS card reader in ...
The IT-6865 has a pleasing look and is therefore the perfect basis for an Office PC. Brushed surfaces provide variety and underline the appealing design of the front panel. The highlight of the IT-6865 is its variety of front connections. Two USB 2.0 and USB 3.0- and a USB Type C connection enable the best data transmission, an SDXC/MMC/MS-Card Reader completes the offer. The compact design in the micro-atx standard offers sufficient space. Two external 3.5 "and 5.25" drives as well a...
For everyone who loves extravagant design, the C-3 sapphire with its slightly tinted side part is made of tempered glass, as well as LED effects on the front, which over the left side of the front panel, the ideal candidate for a high-end-end System with trendy LED lighting. not only contributes to the standard 120 mm RGB LED fan built on the back wall, but above all the colors and color change effects that are adjustable via button. is on the lid of the housing a magnetic dust filter ins...
For all ambitious gamers, the A-3411 Creek offers the ideal basis for a high-end gaming system. Thanks to the integrated RGB LED strip in the front, which can be controlled optionally via an integrated button in the front or via the 5V RGB board, it skilfully stages. The standard -built tempered glass side part offers insights into the built -in hardware and also enhances the entire system. Up to four other RGB devices with 5V 3-pin RGB header and four 3-pin fans can be connected to the integ...
For everyone who likes design, the Thunder with its slightly tinted side part made of plexiglass and the switchable LED light on the front is the ideal candidate for a PC system with a trendy LED lighting. The standard 120 mm fan with blue LED lighting also contributes to this. Two further installation options for 120 mm fans in the front also improve the airflow in the housing. On the lid of the housing there are USB 2.0 and 3.0 connections, the HD audio sockets and the LED button, with wh...
The C-303 Mirror convinces with its slightly mirrored tempered glass front panel. The tempered glass side part extends over three quarters of the housing and offers insights into the interior of the housing and the built -in hardware. Installation spaces for a further 120 mm or 140 mm fan, optionally a 120 mm, 240 mm or 280 mm AIO water cooling as well as installation options for 2.5 "SSDs can be found in the spacious interior. The 3.5" hard drives are in a separate cage, which is located in ...
A real bestseller in the category of classic housing is the Velvet II. Immondary Elegance and a timeless design allow use in a variety of environment. On the front, the IT-8833 Velvet II, in addition to HD- Audio connections, offers a USB 3.0 and a USB 3.0 Type C connection. The spacious design in the ATX standard offers enough space for external and internal drives, and and Thanks to the existing fan preparations, good opportunities for a perfect airflow. USB 3.0 Type C Inte...
With the IT-607 desktop you will experience innovative concepts in the smallest space! Starting with the assembly cage, which can be turned out 90 ° and thus contributes to the simple assembly of all drives, via an additional installation space in the bottom of the housing, which can optionally absorb a 2.5 "(6.35 cm) hard drive or a 60 mm fan. The integrated, Powerful 300 watt power supply supplies all installed components with sufficient electricity. The IT-607 desktop is positioned space...
With its pleasing look, the H-606 offers the perfect basis for a silent PC system. The insulated housing has been developed for running-free systems and is therefore ideal for use in a low-noise environment. offers its compact design in the micro-atx standard thanks to the waiver of external drive shafts, and can also use graphics cards Record up to a length of 32 cm. Ul> both side parts and lids insulated Two USB 3.0 interfaces standard 120 mm fan rubberized power supply ...
The IT-5905 is a modern midi tower in a robust and compact design, which can convince by the user-friendly arrangement of its front connections. In addition to the look, the IT-5905 convinces with space for up to four optional fans, installation options for a variety of 3.5 "and 2.5" hard drives and a well thought-out inner cage, which offers space for graphics cards up to a length of 35.5 cm. The two USB 3.0 front connections and the small part shelf in the lid (for e.g. USB sticks) comp...
The T-11 Televeven convinces with the front panel with mesh grille insert, behind which up to three 120 mm fans can be assembled, which can contribute to a good air circulation. Another five fan installation spaces can be found in the lid, on the back and above the power supply tunnel, in which the power supply and two screwless 3.5 "installation sites are located. Slightly tinted. In the lid there is a magnetic dust filter that can be easily removed and cleaned by lifting. In addition to the...