Under the designation X7703A-4 is a complete memory
kit for Sun server
s and workstations. In particular, this offers adva
ntages in compatibility, since the two included modules have been fully tested and tested for use. In addition, these are new RAM
memories, which is why nothing stands in the way of the immediate upgrade or repair.
The basic thing about the Sun X7703A-4 RAM
kit is that there are two DIMM
modules with 512 MB each that work with DDR-SDRAM memory
technology. You can expand the main memory
directly by 1 GB total capacity. Equally, two defective storage
latches can, of course, be exchanged against these in order to produce a reliable operation again.
At the memory
clock frequency the 512 MB DDR-SDRAM
modules of the Sun X7703A-4 support a total of 333 MHz
. It is, of course, possible to adapt it to the other installed
modules or the other hardware. In addition, the memory
can also be used in other systems that are not from Sun, because the respective properties are completely standardized.
However, an important feature of the 1 GB memory
module Sun X7703A-4 is the ECC
function. This is only supported in some server
s and workstations and must be ava
ilable in any case. In a desktop PC or other devices that do not have an ECC
, the RAM memory
can be used but not used.
|Description||Sun X7703A-4 Memory Kit - 1GB (2x 512 MB) - PC-2700 - DIMM 184-PIN - DDR SDRAM|
|Memory||1 GB (2x 512MB)|
|Error Correction||Registered ECC|
Memory Speed||333 MHz|
|Suitable for||only Server and Workstation, not suitable for normal computer|
|Delivery Content||1x Memory-Kit, additional accessories not included|