Make sure the Startech PEXSAT32 PCI Express controller card
for two high-speed connections to your external storage
solutions, via eSATA
3.0 (6Gb / s). By supporting multiple systems, due to the wide
spread interface, the expansion card can be used flexibly and integrate into existing environments. It would be conceiva
ble, for example, the use in a used computer
, as well as a workstation.
After the Startech PEXESAT32 expansion card
in the PCI Express slot of your have placed desktop PCs, you can use the back waiting eSATA
ports. These offer a transfer rate of up to 6.0 Gbit / s, according to the SATA
III standard, of course, is for backward compatibility with SATA
I and II. In addition, all known operating systems are supported, such as Windows 10, Server
2012, Mac OS El Capitan or Linux.
If you have a PC in the smaller form factor, you can just 2-Port eSATA
mount an optional low profile / half-height bracket on Startech PEXESAT32
6 Gb / s PCI-Express controller. Thus, the manufacturer provide
s an even better compatibility with a va
riety of computer
systems. As chip set the Marvell 88SE9128 is used, which is primarily responsible for the operating system support.
As another option that supports Startech PEXESAT32 dual-port eSATA 3.0 PCI-Express Controller Card
is the port duplication and RAID
. The latter may be the RAID
mode 0 (Stripe) or 1 (Mirrored) act. The card itself operates on the PCI Express 2.0 standard, allowing you to get the required performance, which always also depends on the respective host system.
|Description||Startech PEXESAT32 - 2-Port eSATA 6Gb/s PCI-Express Controller Card|
|Device Type||2-Port eSATA 6Gb/s PCI-Express Controller Card|
|P / N||PEXESAT32|
|Data transfer rate||6Gb/s|
RAID 0 |
|Delivery Content||1x Card, additional accessories not included|