The basis for the RAM module M378T6453FZ3-CD5 from Samsung is 512 MB DDR2-SDRAM. Be sure to check if your desktop computer supports this storage technology beforehand. The data sheet of the PC or the main board is suitable for this purpose, for example. There may also be information on the maximum capacity or the number of DIMM slots.
To upgrade or replace the memory, you must place the Samsung M378T6453FZ3- CD5 512 MB DDR2-SDRAM module in the corresponding DIMM slot of the main board. It is then automatically detected and set up during system startup. You do not have to make any further settings or even perform a new installation.
After commissioning the Samsung M378T6453FZ3-CD5 works 512 MB DDR2 DIMM memory with a maximum of 533 MHz. If necessary, this is indicated in the data sheet only with the designation PC-4200. However, the storage clock frequency can also be reduced, provided the system supports only lower clock rates. As a rule, this is done automatically by the other hardware, so no manual intervention is necessary in such a case either.
|Product Description||Samsung M378T6453FZ3-CD5 Memory - 512 MB - DIMM 240-PIN - PC-4200 - DDR2 SDRAM|
|Storage||512 MB ??|
|Form Factor||DIMM 240-PIN|
|Error Correction||Non ECC|
|Memory Speed||533 MHz|
|Suitable for||Suitable for normal Computers|
|Delivery Content||1x Memory, additional accessories not included|