NetApp StorageShelf DS14MK2 DS14 MK2 - 2x ESH4 - 14x 300GB FC HD - Used
Description
Find a storage solution that not only in terms of performance and capacity to meet your demands, but the possibility remains affordable, you should look at the NetApp Storage Shelf DS14MK2 . This is already fully equipped and can be used instantly. Since this is a used hard disk shelf, it is cost effective, but of course functional with no limitations.
With a total of 14 hard drives delivers the Storage Shelf DS14 MK2 a total storage capacity of 4.2 TB. So each drive has a 300 GB capacity and is operated at 10,000 rev / min. For quick access to the data of the NetApp system, it makes the 2 Gb Fibre Channel interface. If higher capacities needed of course nothing to prevent a later upgrade.
Thanks to the hot-swap capability, an exchange of the disks during operation can be carried out. The NetApp Storage Shelf DS14MK2 must therefore not be shut down or off, which would be disruptive especially in stressful everyday business. For the simple use of in-rack, three unoccupied height units are required.
If it comes at you in particular a high level of reliability on, you will be satisfied with the redundant power supply. If one power supply, the remaining supply of NetApp Storage Shelf DS14 MK2 can take over. Here a change of the faulty model in operation is also possible, which eliminate downtime and costs can be saved.
With a total of 14 hard drives delivers the Storage Shelf DS14 MK2 a total storage capacity of 4.2 TB. So each drive has a 300 GB capacity and is operated at 10,000 rev / min. For quick access to the data of the NetApp system, it makes the 2 Gb Fibre Channel interface. If higher capacities needed of course nothing to prevent a later upgrade.
Thanks to the hot-swap capability, an exchange of the disks during operation can be carried out. The NetApp Storage Shelf DS14MK2 must therefore not be shut down or off, which would be disruptive especially in stressful everyday business. For the simple use of in-rack, three unoccupied height units are required.
If it comes at you in particular a high level of reliability on, you will be satisfied with the redundant power supply. If one power supply, the remaining supply of NetApp Storage Shelf DS14 MK2 can take over. Here a change of the faulty model in operation is also possible, which eliminate downtime and costs can be saved.
Product Description | NetApp Storage Shelf DS14MK2 DS14 MK2 - 2x ESH4 - 14x 300GB FC HD - Used |
Form Factor | Rack - mountable - 3U |
Dimensions (width x depth x height) | 44.7 cm x 50.9 cm x 13.3 cm |
Weight | 35 kg |
Type | Storage Enclosures |
Case | |
Integrated Peripherals | Embedded Switched Hub 4 |
Installed Devices / Modules | 14 |
Supported Devices / Modules | 14 |
Supported Drives | 2Gb Fibre Channel |
Hard disk | |
Type | Hot-swap - plug-in module |
Capacity | 14 x 300 GB |
Spindle Speed | 10000 rpm |
Expansion / connectivity | |
Expansion Bays | 14 (total) / 0 (free) x hot-swap - 8.9 cm (3.5 ") |
Interfaces | 2Gb Fibre Channel |
Power | |
Power Device | 2 x power supply - hot-plug-in module |
Max. Supported Qty | 2 |
Redundant power supply | Yes |
Plan for redundant power supply | 1 + 1 |
Power Requirements | AC 120/230 V (50/60 Hz) |
Other | |
Power Requirements | AC 120/230 V (50/60 Hz) |
Delivery Content | 1x Storage, 14x 300GB FC disks, additional accessories not included |
Shipping weight: | 45,00 Kg |
Product weight: | 35,00 Kg |
Ratings (0)
Average product review
Hardware Service Guide
Product Tags
Please visit our FAQ
We may have answered your question there already.