was manufactured by the manufacturer for conventional computer
systems. Therefore, this works in many PCs of the well-known manufacturers and can be used for a quick and above all cost-effective upgrade. Likewise, of course, a defective module can be replaced with this to make a sli
Basically, the Micron
MT8JTF12864AZ-1G1F1 has 1GB DDR3 SDRAM
, which is one of the most important compatibility features. Therefore, check the data sheet, manual or other manufacturer information of your PC to see if this memory
technology is supported. Often, the maximum possible capacity is specified there or the procedure for use is described in detail.
However, for most desktop computer
s, commissioning the Micron
MT8JTF12864AZ-1G1F1 1GB DDR3 memory
is easily done. So it is often enough just to open the PC case to access the DIMM
slots on the motherboard
. Insert the module there and on the next start it will be automatically recognized by the system.
Further configurations are not necessary after using the 1 GB DDR3 DIMM
, because features such as the memory
clock rate are also automatically configured. The Micron
supports a maximum of 1066 MHz
(as specified by PC-8500), but can also accommodate lower clock rates. Thus, a compatibility with va
rious PC systems is given.
Micron MT8JTF12864AZ-1G1F1 Memory - 1 GB - DIMM 240-PIN - PC-8500 - DDR3 SDRAM|
|Geignet für||für normale Computer geeignet|
|Lieferumfang||1x Speicher, weiteres Zubehör nicht im Lieferumfang|