Micron MT8HTF6464HDY-53ED3 Memory - 512 MB - SODIMM 200-PIN - DDR2 - PC-4200
For an upgrade, the memory is usually first considered, since this is easily expandable in many cases and does not cause a high cost. Use the 512 MB DDR2 module MT8HTF6464HDY-53ED3 from the memory specialist Micron. This is particularly suitable for mobile devices such as notebooks and compact PC systems.
The Micron MT8HTF6464HDY-53ED3 is the basis for the 512 MB DDR2-SDRAM, which must be supported by the target system in any case. Therefore, please check the data sheet of your system before purchase so as to establish a correct support. Some OEM manufacturers also directly specify the maximum memory capacity and the number of RAM slots.
A low latency of CL4, adds Micron to the 512 MB DDR2 RAM MT8HTF6464HDY-53ED3 with a maximum memory clock frequency of 533 MHz. These are also found in technical descriptions under the designation PC-4200. If your notebook only allows a lower clock rate, the clock will be automatically reduced so as to allow usage.
To use the Micron MT8HTF6464HDY-53ED3 memory, you must use the 512 MB DDR2 SODIMM module only in the corresponding slot of the notebook. Often these are located under a maintenance flap on the bottom. The entire upgrade can thus be completed in a few steps and in a short time, enabling you to quickly use the increased performance.
The Micron MT8HTF6464HDY-53ED3 is the basis for the 512 MB DDR2-SDRAM, which must be supported by the target system in any case. Therefore, please check the data sheet of your system before purchase so as to establish a correct support. Some OEM manufacturers also directly specify the maximum memory capacity and the number of RAM slots.
A low latency of CL4, adds Micron to the 512 MB DDR2 RAM MT8HTF6464HDY-53ED3 with a maximum memory clock frequency of 533 MHz. These are also found in technical descriptions under the designation PC-4200. If your notebook only allows a lower clock rate, the clock will be automatically reduced so as to allow usage.
To use the Micron MT8HTF6464HDY-53ED3 memory, you must use the 512 MB DDR2 SODIMM module only in the corresponding slot of the notebook. Often these are located under a maintenance flap on the bottom. The entire upgrade can thus be completed in a few steps and in a short time, enabling you to quickly use the increased performance.
Product Description | Micron MT8HTF6464HDY-53ED3 Memory - 512 MB - PC-4200 - SODIMM 200-pin - DDR2 |
Packaged Quantity | 1 |
Storage | 512 MB ?? |
Technology | DDR2 SDRAM |
Form Factor | SODIMM 200-PIN |
Bus Type | PC-4200 |
Memory Speed | 533 MHz |
CAS Latency | CL4 |
Voltage | 1.8 |
Suitable for | Notebook |
Delivery Content | 1x Memory, additional accessories not included |
Average product review
Memory (RAM): | 512 MB |
compatible with: | compatible with laptops Compatible with notebooks |
Condition: |
|
Please visit our FAQ
We may have answered your question there already.