The Micron MT18HTF25672PY-667E1 memory is ideal for bringing a server or workstation back to life. Due to the different features of the RAM is mainly intended for used business systems. In addition to an extension, you can of course also use the high-quality memory for repairs and replace a defective module.
Micron has equipped the MT18HTF25672PY-667E1 memory module with a total of 2GB DDR2 SDRAM. However, it is also Registered ECC memory, which is why there is no compatibility with conventional PC systems. However, even with a server or a workstation it is essential to check the information in the data sheet.
In terms of memory speed, the Micron MT18HTF25672PY-667E1 supports 2 GB DDR2 ECC RAM at a maximum of 667 MHz. Which clock is ultimately used, but also depends on the other hardware. For this reason, please also refer to the specification PC-5300 in the technical information about the system. According to the manufacturer, the latency is also CL5.
To upgrade the server or the workstation, opening the case is usually sufficient. The Micron MT18HTF25672PY-667E1 2GB DDR2 ECC DIMM must be inserted into the slot on the motherboard. Many manufacturers describe the procedure but also in detail in the manual. In case of doubt, you should also consult the latter.
||Micron MT18HTF25672PY-667E1 Memory - 2 GB - 240-pin - DDR2 SDRAM
|Data Integrity Check
||Only Server and Workstation, not suitable for normal Computers
||1x Memory, additional accessories not included