IBM 38L5221 Memory - DDR-SDRAM - 1 GB - PC-3200 - DIMM 184-PIN
If the demands on your server have increased, it is often worthwhile to upgrade the main memory. Thus, the IBM 38L5221 RAM can improve the performance noticeably, but at the same time does not cost much, so that overall an ideal price-performance ratio is created. Likewise, the memory module is of course suitable as a replacement for defective memory.
The IBM 38L5221 has 1 GB of DDR SDRAM memory, which also provides an important compatibility feature. The storage technology must always be supported by the target system. In addition, the RAM memory has the Registered ECC capability, so it is only possible to use it in servers and workstations that can operate the corresponding modules.
The memory clock rate of the IBM 38L5221 uses 1 GB of DDR ECC RAM at a maximum of 400 MHz, which can also be recognized by the PC-3200 specification. The latency is also CL3 and the memory was manufactured according to the specification with a 184 pin connector strip in DIMM format. Other accessories are not required for commissioning.
If you want to use the IBM 1 GB DDR ECC RAM, check the compatibility directly with the help of the FRU 38L5221. Based on this, for example, a support of IBM eServer xSeries x326m (8848-XXX) can be found. Of course you can also make a direct comparison of the technical data to see if the memory module can be operated in your server.
The IBM 38L5221 has 1 GB of DDR SDRAM memory, which also provides an important compatibility feature. The storage technology must always be supported by the target system. In addition, the RAM memory has the Registered ECC capability, so it is only possible to use it in servers and workstations that can operate the corresponding modules.
The memory clock rate of the IBM 38L5221 uses 1 GB of DDR ECC RAM at a maximum of 400 MHz, which can also be recognized by the PC-3200 specification. The latency is also CL3 and the memory was manufactured according to the specification with a 184 pin connector strip in DIMM format. Other accessories are not required for commissioning.
If you want to use the IBM 1 GB DDR ECC RAM, check the compatibility directly with the help of the FRU 38L5221. Based on this, for example, a support of IBM eServer xSeries x326m (8848-XXX) can be found. Of course you can also make a direct comparison of the technical data to see if the memory module can be operated in your server.
Description | IBM 38L5221 Memory - 1GB - PC-3200 - DIMM 184-PIN - DDR-SDRAM |
Packaged Quantity | 1 |
Memory | 1 GB |
Technology | DDR SDRAM |
Form Factor | DIMM 184-PIN |
Error Correction | Registered ECC |
Bus Type | PC-3200 |
Memory Speed | 400 MHz |
CAS Latency | CL3 |
Suitable for | Server and workstation only, not suitable for normal computers |
Delivery Content | 1x Memory, other accessories not included |
Average product review
Memory (RAM): | 1 GB |
compatible with: | compatible with server compatible with Workstation |
Condition: |
|
Please visit our FAQ
We may have answered your question there already.