Especially the use of the Hynix HMT125U7AFP8C-G7 2 GB DDR3 ECC main memory is pleasantly easy. The module only needs to be placed in the appropriate DIMM slot on the motherboard for use directly at the next system boot. In most cases, it is sufficient to open the case of the server or workstation for a short time.
Before you start, you should of course check whether the Hynix HMT125U7AFP8C-G7 memory is compatible with your system. This is best suited to the data sheet or the manual. Check there to see if 2GB DDR3 SDRAM and the ECC feature are supported. If in doubt, you can of course also contact us.
The connection of the Hynix HMT125U7AFP8C-G7 2 GB DDR3 ECC RAMs takes place over a maximum clock of 1066 MHz, which is also indicated by the designation PC-8500. If the rest of the hardware slows down the memory, it will usually auto-tune, allowing the memory to be used without any problem.
|Description||Hynix PC-8500 HMT125U7AFP8C-G7 Memory - 2GB - 240-pin DDR3 RAM|
|Suitable for||server and workstation only, not suitable for normal computers|
|delivery||1x memory, other accessories not included|
- Condition: Brand new, bulk