The Hynix HMP31GF7AFR4C-Y5 integrates 8 GB of DDR2 SDRAM, which will significantly expand the main memory of the target system. However, your server or workstation not only needs to support storage technology, but also fully buffered ECC memory. Therefore, it is imperative that you check the relevant information in the data sheet or consult the other manufacturer information.
After use, the Hynix HMP31GF7AFR4C-Y5 8 GB DDR2 ECC RAM is operated with a maximum memory clock of 667 MHz. This is also indicated under the designation PC-5300, whereby adjustments to a lower cycle are quite possible. The latter is required if the additional hardware specifies corresponding restrictions. Such adjustments are usually done fully automatically.
To use the Hynix HMP31GF7AFR4C-Y5 8 GB DDR2 ECC memory, it is sufficient to use the DIMM module in the appropriate memory slot of the motherboard. Some manufacturers also describe the procedure in detail in the manual, which is why it is always worth a look. Afterwards, you can continue working as usual and use the new power.
|Description||Hynix PC 6400 HMP31GF7AFR4C-Y5 memory - 8 GB - PC 5300-240-pin - DDR2 SDRAM|
|Form Factor||DIMM 240-pin|
|Error Correction||Fully Buffered ECC|
|Memory Speed ??||667 MHz|
|Suitable for||only Server and Workstation, not suitable for normal computer|
|delivery||1x storage, additional accessories not included|
- Condition: Brand new, bulk