Hynix HYMP525P72CP4-Y5 Memory - 2 GB - 240-pin - DDR2-SDRAM - PC-5300
The Hynix HYMP525P72CP4-Y5 is a memory module that is particularly suitable for used servers due to its various features. Use it, for example, for an upgrade to increase the performance of the system quickly and reliably. The deployment does not require a long downtime and no additional configurations are required on the operating system.
One of the key features of the Hynix HYMP525P72CP4-Y5 is the built-in 2GB of DDR2 SDRAM, which also translates into true performance. However, the server or workstation must also be able to handle ECC memory. You should therefore check the compatibility beforehand, for which purpose, for example, the information in the data sheet is suitable.
Among the other features of the Hynix HYMP525P72CP4-Y5 2 GB DDR2 ECC RAMs is the memory clock rate of a maximum of 667 MHz. If necessary, this also adapts to lower values ??if restrictions exist due to the additional hardware. The latency is CL5 and the power supply is 1.8 volts.
In order to finally use the Hynix HYMP525P72CP4-Y5 2 GB DDR2 ECC RAM, it is sufficient to place the DIMM module in the corresponding slot on the mainboard. The exact procedure describes many server manufacturers additionally directly in the manual, so that there is always worth a look. Afterwards you can use the extended main memory directly.
One of the key features of the Hynix HYMP525P72CP4-Y5 is the built-in 2GB of DDR2 SDRAM, which also translates into true performance. However, the server or workstation must also be able to handle ECC memory. You should therefore check the compatibility beforehand, for which purpose, for example, the information in the data sheet is suitable.
Among the other features of the Hynix HYMP525P72CP4-Y5 2 GB DDR2 ECC RAMs is the memory clock rate of a maximum of 667 MHz. If necessary, this also adapts to lower values ??if restrictions exist due to the additional hardware. The latency is CL5 and the power supply is 1.8 volts.
In order to finally use the Hynix HYMP525P72CP4-Y5 2 GB DDR2 ECC RAM, it is sufficient to place the DIMM module in the corresponding slot on the mainboard. The exact procedure describes many server manufacturers additionally directly in the manual, so that there is always worth a look. Afterwards you can use the extended main memory directly.
Product Description | Hynix HYMP525P72CP4-Y5 Memory - 2 GB - PC 5300-240-pin - DDR2 SDRAM |
Packaged Quantity | 1 |
Storage | 2GB |
Technology | DDR2 SDRAM |
Form Factor | 240-pin DIMM |
Error Correction | Registered ECC |
Bus Type | PC-5300 |
Memory Speed | 667 MHz |
CAS Latency | CL5 |
Voltage | 1.8 |
Suitable for | only Server and Workstation, not suitable for normal Computers |
Delivery Content | 1x Memory, other accessories not included |
Average product review
Memory (RAM): | 2 GB |
compatible with: | compatible with server compatible with Workstation |
Condition: |
![]() |
Please visit our FAQ
We may have answered your question there already.