The main memory capacity of your PC is increased by the Hynix HMT112U6DFR8C-H9 module by a total of 1 GB. Note, however, that the memory technology DDR3 SDRAM must be supported by the system. Check the data sheet of the computer or its main board, where information about the maximum memory capacity can be found.
After the use of the Hynix HMT112U6DFR8C-H9 1 GB DDR3 memory, the module operates with a maximum clock rate of 1333 MHz, according to the specification PC-10600. If the other hardware supports only a lower clock, an automatic adjustment is made to enable the use of the memory module.
In many cases, it is sufficient to open the housing only to enable the Hynix HMT112U6DFR8CH9 1 GB DDR3 DIMM module to be used. The corresponding slots are located directly on the main board. However, many manufacturers describe the exact procedure for the upgrade also directly in the manual. A new installation or further configurations on the hardware are not necessary.
|Description||Hynix HMT112U6DFR8C-H9 Memory - 1 GB - PC-10600-240-pin - DDR3 RAM|
|Memory Speed||1333 MHz|
|Suitable for||Suitable for normal Computers|
|Delivery Content||1x Memory, additional accessories not included|