The HP SAS HDD EG0300FCVBF
is an original replacement for server
s and workstations from HP. Through the Small Form Factor (SFF
) are also found in compact systems into place and leaves nothing to be desired in terms of their performance openly. Take adva
ntage of the SAS hard disk therefore to upgrade your system to obtain more memory
or replace a defective model to get back to all the benefi
ts and features.
In the EG0300FCVBF
HDD HP relies on the quality of Seagate
and sets the model Savvio ST300MM0006
a. Thus, the SAS drive can of course also be used in server
s from other manufacturers. Necessary for this are only the support of SAS technology and a drive bay for 2.5 inch hard drives.
For HP workstations and server
s know the EG0300FCVBF
HDD but of course a particularly high level of compatibility, since you have been tested with different models. Whether your system is one of them, see eg. On the HP Part Number 652 564-B21
, or Part Number 693569-001
out. Especially often these are listed in the Service Manual to ide
ntify the supported components without a doubt.
Leistungstechnisch you get offered a maximum, which is designed for corporate use of the HP EG0300FCVBF
SAS HDD. Overall, the hard drive holds 300 GB of storage
, and offers a 64 MB buffer memory
. Due to the SAS technique, the data transfer rate is up to 600 MB / s.
|Product||HP EG0300FCVBF - Savvio ST300MM0006 hard drive - 300 GB - 10000 rpm - 2.5 "- SAS - 693569-001 - 653955-001B|
|Device Type||Hard drive - internal|
|P / N||693569-001|
|HP P / N||652564-B21|
|Form Factor||6.4 cm SFF (2.5 "SFF)|
Serial Attached SCSI 2 - SAS|
|Drive Transfer Rate||600 MBps|
|Spindle Speed ??||10000 rpm|
|Delivery Content||1x HDD, additional accessories not included|