Article details
Cisco routers and switches are among the most reliable in their class and are therefore used primarily in companies. With the NM-1FE2W 1-Port 10/100 Ethernet Module you get a general overhaul extension card, which ideally complements the performance of a compatible router. This allows new requirements to be mastered quickly and cost-effectively.
The Cisco NM-1FE2W expansion module offers a 10/100 Ethernet port as well as two WIC slots. In addition to auto sensing and half / full duplex, the network port also supports inter-switch link (ISL) and Token Ring ISL. If you want to achieve faster and faster performance, you can also use several of these modules in the respective router.
The two WIC slots on the Cisco NM-1FE2W expansion card support the use of WAN interface cards such as WIC-1DSU-56K4 or WIC-1B-S / T. Note, however, that there are WIC cards that do not work in this module. Check in advance whether the desired configuration works and has been approved by the manufacturer.
A compatible router is required to use the Cisco NM-1FE2W 1-Port 10/100 Ethernet Module. This may be one of the Cisco 3620, 3640 or 3660 type, if at least IOS Software Release 12.0 (7) XK, 12.1 (1) T, 12.2, or 12.2T is installed. If, on the other hand, you have a Cisco 2691, 3725 or 3745, all software versions are supported without restrictions.
The Cisco NM-1FE2W expansion module offers a 10/100 Ethernet port as well as two WIC slots. In addition to auto sensing and half / full duplex, the network port also supports inter-switch link (ISL) and Token Ring ISL. If you want to achieve faster and faster performance, you can also use several of these modules in the respective router.
The two WIC slots on the Cisco NM-1FE2W expansion card support the use of WAN interface cards such as WIC-1DSU-56K4 or WIC-1B-S / T. Note, however, that there are WIC cards that do not work in this module. Check in advance whether the desired configuration works and has been approved by the manufacturer.
A compatible router is required to use the Cisco NM-1FE2W 1-Port 10/100 Ethernet Module. This may be one of the Cisco 3620, 3640 or 3660 type, if at least IOS Software Release 12.0 (7) XK, 12.1 (1) T, 12.2, or 12.2T is installed. If, on the other hand, you have a Cisco 2691, 3725 or 3745, all software versions are supported without restrictions.
| Description | Cisco NM-1FE2W - 1-port 10/100 Ethernet Module - for Cisco 3600, 3700, 3800 Series |
| Device Type | 1-port 10/100 Ethernet Module |
| Model | NM-1FE2W |
| Compatible with | Cisco 3600 Series, Cisco 3700 Series, Cisco 3800 Series |
| Delivery Content | 1x Module, additional accessories not included |
Condition:
Shipping weight:
0,10 Kg
0 Ratings
Please visit our FAQ
We may have answered your question there already.
