Allied Telesyn offers with the AT-210TS-05D
an IEEE 802.3 compliant Micro transceivers for direct connection of Ethernet
1.0 and 2.0 devices. For this purpose, the 10BASE-T (UTP) standard is used, whereby the cost for wiring can be reduced. In these models will also be provide
d for a particular compatibility by standard ICs are used. The module is used, but can be used without restrictions.
To secure the transfer comes at Allied Telesyn AT-210TS-05D transceiver
the Signal Quality Error (SQE) Technology and a heartbeat test used. The latter can be activa
ted simply and clear, so you can use these as needed and claim. With the help of other integrated technologies, the transceiver module finds out as to whether the connected systems can communicate with each other or a malfunction.
Moreover, periodically pulses are transmitted, the need to arrive on the return channel of the Allied Telesyn AT-210TS-05D
. Should this not be the case inva
lidates the Link LED
and a transfer can take place again when two such packets are sent or arrive a package from the opposite side
The AT-210TS-05D transceiver
from Allied Telesyn but also note the polarity of the paired wires. To change the couples the module thereby takes less than one seconds, and thus creates a fast connection. Many of the functional tests can be while using the control LED
s directly on the module, making a simple start-up is not handicapped.
Allied Telesis AT-210TS-05D - Micro Transceiver - Twisted Pair Transceiver IEEE 802.3 - 10 BASE T (MAU)|
|Data transfer rate||10 Mbps Cabling|
Ethernet 10 Base-T|
|Data Link Protocol||
|Twisted pair||1x AUI to 1 x RJ45|
|Certification||IEEE 802.3 10Base-T transceiver with SQE|
|Compatible with||Cisco AS5200 router and Cisco 2500 Series Router|
|Delivery Content||1x Transceiver, other accessories not included|